Changing the Bulb
Turn off and unplug the salt lamp. Do not attempt to work on the lamp if plugged in as there is a danger of electrocution. Allow the lamp to sit for a short period of time to allow the outer surface and bulb to cool. Under normal operating conditions with the correct bulb wattage, the surface of a salt lamp should be warm to the touch but not hot. It should be comfortable to handle.
Locate the bulb holder, which is typically found at the bottom of the lamp. Take care when turning the lamp over as if it comes into contact with a hard surface it may crack. Lay the lamp down on a soft cloth to protect work surfaces.
Gently remove the bulb holder from the lamp. You may need to twist the bulb holder, or push it in slightly, before removing from the body of the lamp. Make sure that any wiring is not trapped, or overstretched, to avoid any breakage.
Remove the old bulb from the holder. This is generally done in a twisting, or push down motion. Grip the bulb firmly, but gently. And don't apply too much force or the bulb may break. Disposal of the old bulb should be in line with current recycling guidelines.
Use a cloth or gloves when touching the new bulb to stop the transfer of oils. Too much physical contact with the naked bulb can shorten the lifespan as: The oils from your skin can create hot spots on the bulb's surface when it's turned on. These hot spots can cause uneven heat distribution, leading to premature failure or even the bulb shattering. Keeping the bulb clean from oils helps ensure it functions properly for its intended lifespan. The oils can degrade the materials of the bulb, particularly with high-intensity bulbs like halogens. Preventing oils on the bulb reduces the risk of it overheating and potentially causing a fire hazard.
Insert the new bulb into the holder. This step is the reverse of removing the bulb and is done by pushing and twisting it gently into the fitting/housing. Ensure the bulb is firmly seated in the housing.
Reinsert the bulb holder into the base of the lamp. This step is the reverse of removing the bulb holder. Make sure everything is aligned properly and securely seated in the socket.
Plug in the salt lamp and turn it on to test the new bulb. If the bulb lights up you have correctly followed the instructions and no further action is needed.
Finding the Correct Size of Bulb
Consider the size of bulb you will need. The size of the light bulb you need for your salt lamp will depend on the wattage and the type of bulb your lamp requires . Most salt lamps use a candelabra bulb with a small screw base, E12, also known as a C7, that is designed to emit a soft and warm glow.
Consider the wattage of bulb you will need. The recommended wattage for salt lamp bulbs typically ranges between 7-15 watts, depending on the size of the lamp. Larger salt lamps may require a higher-wattage bulb to provide adequate illumination, while smaller lamps will only need a lower-wattage bulb.
Determine the correct size bulb for your lamp. Check the manufacturer's instructions or the label on the lamp itself. This will usually specify the type and wattage of bulb that is recommended for that particular lamp. If you are unsure about the correct bulb size, you can take the old bulb to a hardware store or consult with an electrician to find the appropriate replacement bulb. As a rough guide you can use the following: 7-15 watt light bulb - suitable for compact salt lamps less than 10 pounds 15-watt light bulb - suitable for small salt lamps up to 10 pounds 25-watt light bulb - suitable for mediums salt lamps weighing between 11 - 20 pounds 40-watt light bulb - suitable for large salt lamps weighing over 21 pounds
Comments
0 comment